help
 MSG commands for logos9:
      ADDHOST      INFO       WHO        IDENT
      HELP         VOICE      WHOIS      PASS
      OP           INVITE     GO         KEY
      STATUS
 For help on a command, /MSG logos9 HELP <command>
 Admin: Liam <email: brandtwr@draaw.net>
 There may also be additional commands provided by other modules.

help addhost
 /MSG logos9 ADDHOST <password> <hostmask>
    This lets me recognize you from a new hostmask.  You must use your password (the one you set with PASS) so I know it's really you. The hostmask you tell me must not match any existing ones.

help info
 /MSG logos9 INFO [password] [channel] [an info line]
    Whatever you set as your info line will be shown when you join the channel, as long as you haven't been there in the past three minutes.  It is also shown to people when they ask 
the bot for WHO or WHOIS. You may set an info line specific to a channel like so:
 /MSG logos9 INFO mypass #channel This is my info.
    Or you may set the default info line (used when there is no channel-specific one) like so:  /MSG logos9 INFO mypass This is my default info.
 /MSG logos9 INFO [password] [channel] NONE
-    This erases your info line.

help who
 /MSG logos9 WHO <channel>
    This will show you a list of who's on that channel right now, and each person's info line (if they have one).

help ident
 /MSG logos9 IDENT <password> [nickname]
    This lets me recognize you from a new address.  You must use your password (the one you set with PASS) so I know it's really you.  If you're using a different nickname than you were when you registered, you'll have to give your original nickname too.

help pass
 /MSG logos9 PASS <password>
    This sets a password, which lets you use other commands,
    like IDENT.
    Ops and masters: You need a password to use ANY op or
    master command.

 /MSG logos9 PASS <oldpass> <newpass>
    This is how you change your password.


 /MSG logos9 OP <password> [channel]
    This will tell me to op you on any channel where I have
    ops and you don't.  If you give a channel name, I'll just
    op you on that channel.

help help

 MSG commands for logos9:
      ADDHOST    INFO       WHO        IDENT
      HELP       VOICE      WHOIS      PASS
      OP         INVITE     GO         KEY
      STATUS
 For help on a command, /MSG logos9 HELP <command>
 Admin: Liam <email: brandtwr@draaw.net>
 There may also be additional commands provided by other modules.

help voice
 /MSG logos9 VOICE <password> <channel>
    This will tell me to voice you on the channel if I have ops and you don't have a voice, and I monitor that channel's voices.

help whois
 /MSG logos9 WHOIS <hand>
    This will give you information about someone else I know, including his or her default info line, email address, when they were last on the channel, and if they are an op or master.



help invite
 /MSG logos9 INVITE <password> <channel>
    This will make me invite you to a channel (if I'm on that channel).

help go
 /MSG logos9 GO <channel>
    This makes me leave a channel if I'm not a channel op.
    (It's useful for regaining ops.)

help key
 /MSG logos9 KEY <password> <channel>
    This will send you the key for a channel that is +k and possibly also invite if it is +i (if I'm on that channel).

help status
 /MSG logos9 STATUS <password>
    This gives you a little three line display of my current status.  The status command in dcc chat is much better.


(logos9msg) l9msg.txt updated 15 February 2001
eof